10in. 30T & 12in. 40T Carbide Tip Rip Saw Blades

10in. 30T & 12in. 40T Carbide Tip Rip Saw Blades

Product SKU/Code
10" - 35-10303VPD | 12" - 35-12403VPD

LUXITE® Series 35 Carbide Tipped VPD Rip Saw Blades

Rip saw blades are designed to cut quickly along (or parallel with) the wood grain without tearing or splintering — including hard-to-cut materials such as particle board. They come in 10″ and 12″ diameters and are designed for precision rip cuts with a table saw.

The LUXITE Series 35 VPD Carbide Tip Rip Saw Blades for table saws feature fewer teeth for high performance ripping along the grain for hard, soft and exotic woods. This blade is ideal for cutting particle board and other non-laminated composites. VPD Rip Saw blades are ideal for getting a good clean cut while ripping wood. 

Clear

$75.00$85.00

Rip Saw Blades

Rip saw blades from Luxite Saw are designed to be used with table saws for quick and precise cuts along the wood grain of a board.  These blades work especially well with hardwood and other tough to cut materials. The carbide tips and vari pitch and depth design make these a go to for tough-to-cut materials.  Our customers rave about the durability of the rip cut blades from Luxite.

Our 10-inch and 12-inch rip saw blades produce extremely flat cuts and a high feed rate without overfeed problems. These carbide-tipped rip saw blades offer impressive strength and performance and extended use compared to the competition. Our rip blades are trusted by professional woodworkers, contractors, and DIYers alike to cut without tearing or splintering wood. This leaves them with a smooth surface that’s easier for finishing work and ultimately improves the overall quality of their finished product.

The 10 inch blade comes with 30 teeth, and the 12 inch blade comes with 40 teeth. The lower tooth count makes this blade ideal for quick cuts along the grain of the wood.  The carbide tips provide an additional benefit, as they give the blade a useful life that’s much longer than that of blades sold at big-box stores.

Although the price of our 10 and 12 inch rip saw blades may seem higher than that of other manufacturers, trust that these blades are built to last with the same quality standards of our industrial circular sawmill blades. Using our knowledge of circular saw blades and through a range of field tests, we believe we have created the ultimate rip saw blade for woodworkers of all skill levels.  Even weekend hobbyists rave about Luxite Blades as one blade can potentially last them for years of projects.

Our rip blades are compatible with most major brands of table saws that require 10- or 12-inch blades including DeWalt, Makita, Rigid, Ryobi, SawStop, Powermatic, Delta, and Milwaukee.

If you have any questions about our rip saw blades, give us a call today or contact us online!

Note: all measurements listed are in inches unless otherwise noted.

SKU 35-10303VPD
35-12403VPD
Diameter10″12″
AH5/8″1″
Plate.075″.090″
Teeth3040
Hook
20°
20°
Kerf.105″.125″
GrindATBATB
Top Angle
15°
15°

1 review for 10in. 30T & 12in. 40T Carbide Tip Rip Saw Blades

  1. Nolan

    Truly the best on the market. It’s been months since I’ve installed this on my table saw and still no sign of wear.

Add a review

Your email address will not be published. Required fields are marked *

  • Overview

  • Rip Saw Blades

    Rip saw blades from Luxite Saw are designed to be used with table saws for quick and precise cuts along the wood grain of a board.  These blades work especially well with hardwood and other tough to cut materials. The carbide tips and vari pitch and depth design make these a go to for tough-to-cut materials.  Our customers rave about the durability of the rip cut blades from Luxite.

    Our 10-inch and 12-inch rip saw blades produce extremely flat cuts and a high feed rate without overfeed problems. These carbide-tipped rip saw blades offer impressive strength and performance and extended use compared to the competition. Our rip blades are trusted by professional woodworkers, contractors, and DIYers alike to cut without tearing or splintering wood. This leaves them with a smooth surface that’s easier for finishing work and ultimately improves the overall quality of their finished product.

    The 10 inch blade comes with 30 teeth, and the 12 inch blade comes with 40 teeth. The lower tooth count makes this blade ideal for quick cuts along the grain of the wood.  The carbide tips provide an additional benefit, as they give the blade a useful life that’s much longer than that of blades sold at big-box stores.

    Although the price of our 10 and 12 inch rip saw blades may seem higher than that of other manufacturers, trust that these blades are built to last with the same quality standards of our industrial circular sawmill blades. Using our knowledge of circular saw blades and through a range of field tests, we believe we have created the ultimate rip saw blade for woodworkers of all skill levels.  Even weekend hobbyists rave about Luxite Blades as one blade can potentially last them for years of projects.

    Our rip blades are compatible with most major brands of table saws that require 10- or 12-inch blades including DeWalt, Makita, Rigid, Ryobi, SawStop, Powermatic, Delta, and Milwaukee.

    If you have any questions about our rip saw blades, give us a call today or contact us online!

  • Specs

  • Note: all measurements listed are in inches unless otherwise noted.

    SKU 35-10303VPD
    35-12403VPD
    Diameter10″12″
    AH5/8″1″
    Plate.075″.090″
    Teeth3040
    Hook
    20°
    20°
    Kerf.105″.125″
    GrindATBATB
    Top Angle
    15°
    15°
  • Reviews

  • 1 review for 10in. 30T & 12in. 40T Carbide Tip Rip Saw Blades

    1. Nolan

      Truly the best on the market. It’s been months since I’ve installed this on my table saw and still no sign of wear.

    Add a review

    Your email address will not be published. Required fields are marked *

  • Video